Registrationwala
  • Update and Alerts
  • Become an Associate
  • Get a Quote
  • Login
  • Register

UP Legal Metrology Verification and Re-verification Process for Storage Tanks

In order to store and measure bulk liquids, industries across the state of Uttar Pradesh rely on in-situ (fixed on-site) storage tanks. The Legal Metrology Act 2009, Legal Metrology General Rules 2011 and the Uttar Pradesh Legal Metrology Enforcement Rules 2011 regulate installation of such tanks in the state. Before you can legally put any in-situ storage tank into commercial use, it needs to undergo a mandatory verification process. In this process, a Legal Metrology Officer is required to verify and stamp the storage tanks on-site. If he fails to do so, then you cannot use these tanks.

Even after you get initial approval, you must complete a mandatory re-verification once every five years. Moreover, if you dismantle, repair or re-install an in-situ storage tank at any point before those five years expire, then you must get the tank re-verified and stamped again by a Legal Metrology Officer before resuming operations. In this blog post, we will explain how the Legal Metrology verification and re-verification process for storage tanks works in Uttar Pradesh. 

Why is Legal Metrology Verification and Re-verification Required for In-Situ Storage Tanks?

Legal Metrology verification of on-site storage tank ensures that the tank delivers precise volume measurements before you put it into commercial use. However, the compliance doesn’t end here. Re-verification of such a tank is required after the five-year validity period or after you repair, dismantle or re-install the tank. 

This rule has been put in place to ensure that the tanks remain accurate and fit for usage. Therefore, if you are planning to install or operate a storage tank in Uttar Pradesh, make sure you complete verification or re-verification process, as may be applicable.

Checklist: Verification and Re-verification of Storage Tanks In-Situ

Here is the checklist for verification and re-verification of storage tanks in-situ:

S. No.

Particulars

Details

1.

Name of Approval / NoC / License / Registration

Verification and Re-verification of Storage Tanks in-situ

2.

Competent Authority

Local Legal Metrology Officer (Senior Inspector/Inspector)

3.

Period of Validity 

Five years from date of verification or if repaired/dismantled earlier, date of putting it into re-use

4.

Stage

Pre and Ongoing Operation (Use)

5.

SLA / Number of Days

15 Days (As under Janhit Guarantee Act)

6.

Appellate Authority under Janhit Guarantee Act

First Appellate – respective Div. Assistant Controller, Legal Metrology. 


Second Appellate – Controller, Legal Metrology, UP.

7.

Documents Required

Documents Required for First Verification:

(i). Copy of purchase Invoice.

(ii). Copy of Work Order Invoice.

(iii). Copy of Calibration Chart from Original Fabricator.

 

Documents Required for Re-verification:

(i). Copy of previous verification/rejection certificate(s).

8.

Designated Portal for Form Submission

http://legalmetrology-up.gov.in

9.

Fee & Mode of Payment

INR 50/- for the 1st 100 litre plus INR 7/- for every additional 100 litre or part thereof, subject to maximum INR 5000/- + additional fee @50% of the prescribed fee, for delay of every quarter or part thereof + conveyance as applicable.


Mode of payment: Online

 

What is Procedure for Verification and Re-verification of Storage Tanks In-Situ?

The process of verification and re-verification of storage tanks in-situ involves the following steps:

Step 1: As the first step, the applicant must open the UP Legal Metrology Portal. Thereafter, they need to register on the ‘Citizen Service’ portal by providing their personal details and contact information. A password must then be created for the user ID (mobile number), which will be authenticated through an OTP sent via SMS or email. After that, the applicant can log into ‘Citizen Service Portal’ using the newly created user ID and password. 

Step 2: Once logged into the portal, the applicant must register as a trader by providing all the required details. 

Step 3: Then, click on the request for verification certificates and select "trader" from the dropdown list. After selecting the trader, choose the type of verification: first verification, re-verification (manual to online) or re-verification (online to online). Then, select the type of weights and measures for verification, specifically "verification of Storage Tanks." After that, click the ‘fill’ option to open the application form. 

Step 4: In case of verification, the district nodal officer receives the application on their dashboard and then forwards the same to the appropriate lab nodal officer (Senior Inspector/Inspector/Legal Metrology Officer) based on the applicant's address and jurisdiction. For a re-verification, however, the respective lab nodal officer receives the application directly. 

Step 5: Thereafter, the Lab nodal officer carefully checks the details of the application and inspects the documents uploaded. If needed, the officer may raise a query for clarification or additional information. Then the applicant would have an online option of responding to it. 

Step 6: The lab nodal officer will inform the applicant about verification fee and any additional late fees. The applicant can pay these fees online through treasury ‘head of accounts.’ Once the payment is successfully made, the application will appear on the lab nodal officer's dashboard for further action. 

Step 7: Lab nodal officer then assigns date of verification. This date is intimated to the applicant online as well as through the SMS. On the given date, the applicant may also be required to ensure presence of technical representative of Fabricator. They must also make necessary arrangements as required under law. In addition, they must also produce signed copies of uploaded application and documents. 

Step 8: Upon arriving at premises, the lab nodal officer, who may be a Legal Metrology Officer or a Verification Officer, tests and verifies tanks to determine whether they are in alignment with prescribed standards. If the tanks meet these standards, then officer verifies and stamps them and issues a digitally signed certificate of verification online. 

Step 9: In case that any of tanks do not comply with prescribed standards, a certificate of rejection will be issued, which will detail rejection reasons. The applicant will then need to reapply for verification of rejected tanks after making the necessary adjustments or corrections. Reapplying will incur an additional fee. 

Step 10: The applicant can view and download the verification certificate from their online dashboard. 

Conclusion

In-situ storage tanks are required by industries to store and measure bulk liquids. In order to install and use such tanks, it is necessary to complete the legal metrology verification process. This process involves on-site inspection and stamping by a Legal Metrology Officer. After the 5-year validity expires, re-verification process is required to be completed. However, in some cases, such as repair, dismantling or re-installation, re-verification is required even before the expiry period. 

To apply for verification or re-verification in Uttar Pradesh, you need to visit the designated portal @ http://legalmetrology-up.gov.in. The documents required during the process for first verification include a copy of the purchase invoice, a copy of the work order invoice, and a copy of the calibration chart from the original fabricator. Re-verification requires a copy of the previous verification or rejection certificate.

If you need assistance with the verification/re-verification process, you can get in touch with our legal metrology consultants at Registrationwala.

Frequently Asked Questions (FAQs)

Q1. Why are in-situ storage tanks required?

A. They are required by industries for storing and measuring bulk liquids like crude oil, aviation fuel, sewage treatment, diesel, milk, oil, etc.

Q2. Why do such tanks need to undergo a mandatory verification process?

A. Such tanks need to undergo a mandatory verification process to ensure they deliver accurate volume measurements.

Q3. When is re-verification required for the in-situ storage tanks?

A. Re-verification of such tanks becomes necessary once the five-year validity period expires. However, even before this period ends, you must get the tanks re-verified if you repair, dismantle or re-install them at any point.

Q4. Which is the designated portal for filing an application for verification/re-verification of in-situ storage tanks in Uttar Pradesh?

A. The designated portal for filing an application for verification/re-verification of in-situ storage tanks in Uttar Pradesh is: https://legalmetrology-up.gov.in/

Q5. What documents are required for first verification of in-situ tanks?

A. Documents required for first verification of such tanks include a copy of purchase invoice, copy of work order invoice and a copy of calibration chart from original fabricator.




  • Published: November 17, 2026
42 Views
  • Share This Post

Author: Sachin Chawla

Hi, I'm Sachin Chawla. I’m a commerce graduate from Agra University and a Chartered Accountant (2015) with DISA certification. I focus on helping businesses with formation, management, tax and FEMA matters, business licenses and regulatory compliance, IP advisory, risk management and auditing among others. Through my articles, I aim to share my expertise and provide practical guidance in these areas.

Leave a Comment

Related Posts

Subscribe

Subscribe to our newsletter

Transform your Business.